Home > Knowledge > Content
Shaking head heat press maintenance
- Nov 07, 2018 -

1. Pressure: If the pressure is not enough or too large, adjust the pressure screw (located at the bottom of the aluminum plate), increase the pressure in the clockwise direction, and reduce the pressure in the counterclockwise direction.

2. Time: When the hot stamping time arrives and the buzzer does not ring or keep sounding, check whether the micro switch contact point in the tail box is moderate. If it is not suitable, adjust it to the appropriate position.

3. Temperature: Preheat for about 15 minutes. When the temperature reaches the set temperature, the heating indicator will be off, and hot stamping can be started. If the heating plate does not heat up for a few minutes after starting up, please check the line.

heat press machine-247no