DONGGUAN MYEKOO INDUSTRIAL EQUIPMENT CO. , LTD.

Home > News > Content
Application Of Interlock Sewing Machine In Production Process(ONE)
- Nov 06, 2018 -

(1) For the seaming of the piping

Use the straps to wrap the edges of the pieces in the seams, if you use light to roll. The number of seams on the seam is too large and too thick. If the tailored clothes are worn, it may be uncomfortable, but if the seam sewing machine is used to sew 602 (two needles and four threads) or 605 (three needles and five threads) Stretch stitching, stitching the burrs of the straps, the number of seams on the seams can be reduced from five to three, or 406 (two stitches and three stitches) or 407 (three stitches and four stitches) Interlock sewing) Stitch (to remove the surface of the interlock sewing machine and remove the decorative line from 602 stitches to 406 stitches), see Figure 8. The sewing aid for the piping can be installed on the interlock sewing machine, which can reduce the thickness of the slit and improve the operating efficiency.

(2) Interlock sewing after overlocking

After the knitted garments are sewn with the overlock stitches, the seams of the seams are not conformed, and the seams can be covered with the seam stitches. The protruding seams are applied, but the operation of this procedure is often accompanied by a special needle plate and presser foot to fix the slit to make the operation easier to control.

(3) Sewing process of  lace

Due to the width between the two or three stitches of the stitching stitches, a mesh-like stitching can be used to cover the seam of the lace strip directly on the cut piece. There is no need to fold the edge of the piece to prevent loose edges, which can reduce the thickness of the slit and is more comfortable to wear. For example, women's knitted underwear is often sewn in this way.