DONGGUAN MYEKOO INDUSTRIAL EQUIPMENT CO. , LTD.

Home > News > Content
Embroidery Machine Disconnection Fault Handling
- Oct 30, 2018 -

The reason for the disconnection and its treatment method:

1, the bottom line tension is too large, the treatment method: reasonable adjustment of the tension between the crimping plate and the shuttle skin can be even

2, the needle hole has a fast cut, treatment method: change the needle

3. The thickness of the needle is not matched with the embroidery thread. Processing method: Select the thickness of the needle according to the thickness of the embroidery thread.

4, the hook hook hair, treatment: polishing the hook hook or change the hook

5, the upper thread is not lubricated, the treatment method: the application of silicone oil lubrication treatment

As shown in Figure 6, the hair is blocked by the hair, and the treatment method is: sanding or polishing the hair.

7, take the rod hole hair, treatment: use sand to pull light

8, three eye line hook hole hair, treatment: use sand to pull light

9, needle plate hair hair, treatment: use sand to pull light

10, clamping plate, clamping screw hair, treatment: use sand to pull light

11, positioning hook hair, treatment: use sand to pull light

12, the positioning hook and the shuttle frame gap gap is not reasonable, adjust the gap

13, the upper thread tensioner clip line is broken, remove the garbage in the elastic

14, the needle slot direction is not correct, the processing method: adjust the needle slot direction so that the slot is aligned with the operator

MK ES5